Nial 95/5 (Ni95Al5) Tafa 75b Bond Arc Metco Nickel Aluminum Alloy Thermal Spray Wire

Product Description

NiAl 95/5 (Ni95Al5) Tafa 75B Bond Arc Metco 8400 Nickel Aluminum Alloy Wire Tafa 75B Thermal Spray Wire

Product Description

 

Thermal spray coating wire

Thermal Spray Wire is widely used in arc and flange flame spray systems, highly anti-corroision and anti-high temperature,
coatings to resist heat and prevent scaling of conventional low alloy steels,bond coats for improving the adhesion of top
coatings,coatings on moulds in the glass industry.
Thermal Spray Alloy-NiAl 95/5(Common name:NiAl 95-5, Nickel Aluminum 95/5,N9,Ni95Al5,95/5 Nickel Aluminum,F-80NA Nickel Aluminium 95/5)This alloy is a nickel aluminium alloy characterized by dense coa

Item	Chemical content	Zn	Cd	Pb	Fe	Cu	Balance Total
pure zinc	Nominal value	≥99.995	≤0.002	≤0.003	≤0.002	≤0.001	0.005

Thermal spray wire is a type of material used in thermal spraying processes. It is a feedstock material that is melted or heated and then sprayed onto a surface to create a coating. Thermal spray wire can be made of various materials such as metals, alloys, ceramics, or composites. The wire is fed into a thermal spray gun where it is melted using a heat source (such as a flame or an electric arc) and then propelled onto the substrate using compressed air or another gas.

The thermal spray process is commonly used for applications such as corrosion protection, wear resistance, thermal insulation, and repair of damaged or worn components. The choice of thermal spray wire material depends on the specific requirements of the application, such as the desired coating properties, environmental conditions, and substrate material.

Item	Inconel 625	Ni95Al5	45CT	Monel 400	Monel 500	HC-276	Cr20Ni80
C	≤0.05	≤0.02	0.01-0.1	≤0.04	≤0.25	≤0.02	≤0.08
Mn	≤0.4	≤0.2	≤0.2	2.5-3.5	≤1.5	≤1.0	≤0.06
Fe	≤1.0	N/A	≤0.5	≤1.0	≤1.0	4.0-7.0	N/A
P	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01	≤0.02
S	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01	≤0.01
Si	≤0.15	≤0.2	≤0.2	≤0.15	≤0.5	≤0.08	0.75-1.6
Cu	N/A	N/A	N/A	rest	27-33	N/A	N/A
Ni	rest	rest	rest	65-67	rest	rest	rest
Co	N/A	N/A	N/A	N/A	N/A	N/A	N/A
Al	≤0.4	4-5	N/A	≤0.5	2.3-3.15	N/A	N/A
Ti	≤0.4	0.4-1	0.3-1	2.0-3	0.35-0.85	N/A	N/A
Cr	21.5-23	≤0.2	42-46	N/A	N/A	14.5-16	20-23
Nb	3.5-4.15	N/A	N/A	N/A	N/A	N/A	≤1.0
Mo	8.5-10	N/A	N/A	N/A	N/A	15-17	N/A
V	N/A	N/A	N/A	N/A	N/A	≤0.35	N/A
W	N/A	N/A	N/A	N/A	N/A	3.0-4.5	N/A
Impurities	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5

Thermal spray wires come in various materials, including but not limited to:

Metals: such as tungsten, chromium, aluminum, nickel, titanium, etc.
Alloys: such as cobalt-based alloys, nickel-based alloys, etc.
Ceramics: such as aluminum oxide, zirconium oxide, silicon carbide, etc.
Composite materials: wires that combine different materials.
The choice of material for thermal spray wire typically depends on the following factors:

Application requirements: Select the material based on the desired coating properties, such as wear resistance, corrosion resistance, thermal conductivity, etc.
Working environment: Consider the environmental conditions the coating will face, such as high temperatures, chemical corrosion, etc.
Substrate material: Choose a material that is compatible with the substrate to ensure a strong bond between the coating and the substrate.
By considering these factors, you can select the appropriate material for thermal spray wire based on your specific application needs and conditions.

Detailed Photos

 

 

Certifications

 

Company Profile

Our company Principle is  " Quality first, Customer first".
CHANGZHOU DLX ALLOY CO, LTD was established in 2002 and has got Iso9001 International Quality Management System Certificate and SGS Certificate. Our factory is professional in researching and producing special alloy material. From melting, drawing, heat treatment, finishing and testing .We offer nickel-based, copper-based, and iron-based alloys, including super alloy, welding materials, anti-corrosion alloy, precision alloy, FeCrAl alloy, NiCr alloy, CuNi alloy, thermocouple and etc, in the form of wire, strip, ribbon, bar, tube, plate.

1, We're able to design and develop the product what our customers require and meet their requirements through providing the appropriate engineering drawings or samples.
2, We can provide the products within a week after payment.
3, Wecan provide sample of the products customer need.
4, We always insist on "Quality first, Customer first" as our business philosophy.

Packaging & Shipping

 

FAQ

Question: Are you a trading company or manufacturer?
Answer: We're manufacturer.

Question2:  Could you help to design the product?

Answer:  Yes, we have excellent R&D team, OEM/ODM orders are all welcome.

 

Question: Could you supply samples?

Answer: Yes, wecould supply samples according to your requirement.

Question: could we visit your factory?
Answer: Sure, factory visit is warmly welcome.