Pure Nickel Pipe Ni200 Ni201 Pure Nickel Alloy Seamless Pipe Tube Price Per Kg

• Application: Aviation, Electronics, Industrial, Medical, Chemical
• Standard: JIS, GB, DIN, BS, ASTM, AISI, ISO 9001
• Purity: >99.5%
• Alloy: Non-alloy
• Type: Nickel Pipe
• Powder: Not Powder
• Model NO.: Ni200 Ni201
• Chemical Composition: Ni200 Ni201
• Usage: Industry Heating
• Shape: Round Square
• Surface: Polished, Acid White
• Density: 8.9g/cm3
• Technoloy: Cold / Hot Drawing
• Thickness: 0.8~8.0mm
• Condition: M/Y/Y2
• Transport Package: Carton or Wooden Case
• Specification: OD 6mm~150mm
• Trademark: DLX
• Origin: Changzhou, Jiangsu, China
• HS Code: 7507110000
• Production Capacity: 150ton/Month

Product Description

Pure nickel pipe Ni200 Ni201 Pure Nickel Alloy Seamless Pipe Tube Price Per Kg

 

Product Description

 

Ni201 is a high-purity grade of nickel known for its excellent resistance to various corrosive environments. Here are some general specifications for Ni201 pure nickel tube:

Material: Ni201 (99.6% pure nickel)
Diameter: Varies based on specific requirements
Wall Thickness: Typically specified by the customer
Length: Customizable based on application
Surface Finish: Can be specified (e.g., polished, annealed)
Tolerance: Usually conforms to industry standards

Characteristic and Differences
Nickel 200 is commercially pure wrought nickel. It is highly resistant to various reducing chemicals. It can also be used in
oxidizing conditions that cause the formation of a passive oxide film, for instance its unexcelled resistance to caustic alkalis.
Nickel 200 is limited to service at temperatures below 315ºC, because at higher temperatures it suffers from graphitization which results in severely compromised properties. In that circumstance, Nickel 201 is used instead. It has a high Curietemperature and good magnetostrictive properties. Its thermal and electrical conductivities are higher than nickel alloys.

Nickel 201 is the low-carbon version of Nickel 200. Because of its low carbon content, Nickel 201 is not subject to embrittlement by intergranularly precipitated carbon or graphite when exposed to temperatures of 315 to 760ºC for prolonged time if carbonaceous materials are not in contact with it. Therefore, it is a substitute for Nickel 200 in Applications above 315ºC. However it does suffer from intergranular embrittlement by sulfur compounds at temperatures above 315ºC. Sodium peroxide can be used to change them to sulfates to counteract their effect.

 Chemical 

Grade	Ni+Co	Cu	Si	Mn	C	Mg	S	P
N4	99.8	0.015	0.03	0.002	0.01	0.01	0.001	0.001
N6	99.6	0.10	0.10	0.05	0.10	0.10	0.005	0.002
Ni201	≥99.0	≤0.25	≤0.35	≤0.35	≤0.02	/	≤0.01	/
Ni200	≥99.2	≤0.25	≤0.35	≤0.35	≤0.15	/	≤0.01	/

 

Product Parameters

 

Physical Data
Density	Specific Heat	Electrical Resistivity	Melting Point	Thermal Conductivity	Mean Coeff Thermal Expansion
8.89g/cm3	0.109(456 J/kg.ºC)	0.096×10-6ohm.m	1435-1446ºC	70.2 W/m-K	13.3×10-6m/m.ºC
Typical Mechanical Properties
Mechanical Properties	Tensile Strength	Yield Strength	Elongation	Standard
Nickel 200	462 Mpa	148 Mpa	47%	ASTM B161/B163/B725/B751

 

 

 

 

Detailed Photos

 

 

 

 

 

 

Certifications

 

Company Profile

Our company Principle is  " Quality first, Customer first".
CHANGZHOU DLX ALLOY CO, LTD was established in 2002 and has got Iso9001 International Quality Management System Certificate and SGS Certificate. Our factory is professional in researching and producing special alloy material. From melting, drawing, heat treatment, finishing and testing .We offer nickel-based, copper-based, and iron-based alloys, including super alloy, welding materials, anti-corrosion alloy, precision alloy, FeCrAl alloy, NiCr alloy, CuNi alloy, thermocouple and etc, in the form of wire, strip, ribbon, bar, tube, plate.

 

 

1, We're able to design and develop the product what our customers require and meet their requirements through providing the appropriate engineering drawings or samples.
2, We can provide the products within a week after payment.
3, Wecan provide sample of the products customer need.
4, We always insist on "Quality first, Customer first" as our business philosophy.

Packaging & Shipping

 

 

 

FAQ

Question: Are you a trading company or manufacturer?
Answer: We're manufacturer.

Question2:  Could you help to design the product?

Answer:  Yes, we have excellent R&D team, OEM/ODM orders are all welcome.

 

Question: Could you supply samples?

Answer: Yes, wecould supply samples according to your requirement.

Question: could we visit your factory?
Answer: Sure, factory visit is warmly welcome.